Can boat props be repaired?

Charlie Heidenreich asked a question: Can boat props be repaired?
Asked By: Charlie Heidenreich
Date created: Wed, May 12, 2021 6:16 PM
Date updated: Tue, Sep 6, 2022 11:21 AM


Top best answers to the question «Can boat props be repaired»

Boat Propeller Repair

If prop blades are bent or otherwise damaged, the prop should either be replaced or repaired… A good propeller shop can restore a prop with pretty significant damage, often by welding new material onto the affected blades and then grinding and shaping the blades back to original geometry.

Yes, a boat propeller that has been bent can be repaired. Depending on the amount of damage will determine whether the prop should be repaired or replaced.


Those who are looking for an answer to the question «Can boat props be repaired?» often ask the following questions:

⚓ Are boat props balanced?

Like vehicle tires, wheels and other manufactured products meant to rotate at high speeds, propellers are manufactured to be nearly perfectly balanced.

⚓ Can a boat hull be repaired without taking it out of the water?

  • If the damage to the hull is fairly minor and located above the waterline, you can normally carry out the repairs without taking the boat out of the water. You should not attempt to repair fiberglass that is actually damaged. Instead it should be removed using a circular cut.

⚓ Can a ding in the deck of a boat be repaired?

  • If you do find yourself with a ding in your deck or a hole in your hull, don't fret. Most damage can be repaired fairly easily and the results, even for the do-it-yourselfer, can make it almost impossible to tell where the damage actually took place.

⚓ Can a soft spot in a boat floor be repaired?

  • A soft spot in the boat floor may seem like something innocent, but it requires immediate attention. Not only can a soft spot expand and pose a serious injury hazard to anyone on board, but it will be much easier to repair if it’s limited to a confined space. Here’s how to repair a soft spot in a boat floor to prevent any further damage!

⚓ How did the old drift boat get repaired?

  • The interior of the boat had been repaired with a big patch of fiberglass and epoxy. The previous owner didn’t prep the surface correctly and the fiberglass had detached and water and grime had gotten underneath it. The interior sides and bottom had been painted by what looked like a 2 year old.

⚓ How do you unseat a boat and have it repaired?

  • Derp! Take the one you have set to sails when you are anchored walk up to them and click unseat option. after a few minutes of standing they will start sweeping indicating they have started to repair.Automated repair takes quite some time versus doing it yourself. Idle Crew is the key here, you will see them swabbing the deck.

⚓ What happens to a boat that has been repaired?

  • Once the cost of the repairs gets to around 80 percent of the “Agreed Value” or “Actual Cash Value” (depending on the policy), the insurance company is likely to declare it a “Constructive Total Loss” (CTL), write a check to the owner, and turn to a salvage company to sell what remains of the boat. Totaled. Now what?

⚓ Where can i get a boat canvas cleaned or repaired?

  • If you need canvas for boats cleaned or repaired, call Mac's Upholstery. We offer a canvas upholstery cleaning service and free on-site estimates. If you need a boat canvas top, dodger, enclosure or canvas upholstery sewn or repaired call Mac's Boat and Yacht Canvas Shop.

⚓ Where can i get a boat repaired in plainville ct?

  • WELCOME to Affordable Marine Repair located in the Downtown Marine district of Plainville Ct. We have been named Hornet Hi-Performance Boat dealers and Tohatsu Outboard Motor dealers in 2016! We specialize in REPOWER options for boats from 16ft & up.

9 other answers

Yes, a boat propeller that has been bent can be repaired. Depending on the amount of damage will determine whether the prop should be repaired or replaced. Here is a great break down of what you want to know in order to determine whether your propeller is repairable or should be replaced! What Kind of Propeller Do You Have?

Can this prop be repaired? Should it be? Aluminum Props. If the basic performance factors were okay, next you need to evaluate the feasibility of repairing the prop. If you have an aluminum prop, you should inspect for excessive metal loss (more than 10% of the blade area), extended cracks, blades that are too thin, or cavitation burns.

Boat Propeller Repair. If prop blades are bent or otherwise damaged, the prop should either be replaced or repaired. Obviously with those bent blades the prop is not going to function properly and boat performance will suffer, but the damaged prop is also likely now unbalanced, which can cause vibration at high speed which can lead to more problems.

After some time, propellers will get corroded and/or experience electrolysis damage. As this damage cannot be repaired, consumers will need to get a new propeller. If left alone, the damage will eventually ruin the prop. Boat owners who are unsure of whether or not to repair their propeller should go to their local prop shop.

Even minor prop damage can reduce boat performance, but a few tools and little know-how can eliminate issues.

Propellers should be rebuilt as close to OEM standards as possible, to maintain the performance and efficiency of a boat. Most propellers can be repaired quite a few times before a person needs to purchase a new propeller. A propeller can be modified to obtain maximum performance from a given motor. Choose a propeller repair topic on the left

Most props so afflicted can be repaired, but if you don't fix it, you'll end up losing the blade, damage that cannot be repaired. Prevention costs much less than the cure. Worn Won't Work

propellers can be replaced. Usually, if more than 1/3 of a blade is missing or the metal of center hub of the propeller is damaged, the propeller cannot be repaired. In addition, aluminium propellers that have been repaired multiple times may not be able to be repaired due to

DIY Propeller Repairs. Unless you are an expert welder who also happens to have access to a hydraulic press, the chances of your completing a major propeller repair or reconditioning job successfully are slim and none. And Slim doesn't work here anymore. That doesn’t mean you shouldn’t perform minor repair and maintenance.

Your Answer

We've handpicked 6 related questions for you, similar to «Can boat props be repaired?» so you can surely find the answer!

Where can i get a boat repaired in san jose?
  • Fiberglass Unlimited at 1025 San Jose Ave was recently discovered under boat repair and service. T and L Outboard Repair at 1950 N Academy Ave was recently discovered under engine repair.
Where can i get my boat repaired in bellingham wa?
  • Bellingham Marine Repair is ideally located in Bellingham’s historic Old Town. Near the waterfront, this location gives us easy access to the harbor and other haul-out locations. Since 1985, Bellingham Marine Repair has provided expert marine repair service. We can fix any boat, large or small.
Where can i get my boat repaired in victoria?
  • Blackline Marine Inc. is a yacht repair and overhaul company located in Sidney, 20 miles north of Victoria on Southern Vancouver Island. At Canoe Cove Marina, power and sail yachts up to 70 feet and 50 tons can be hauled and accommodated in our heated buildings or work yard.
Where to get your boat repaired in south jersey?
  • Our mechanics have many years of experience and are factory certified in repairs to Honda, Johnson/Evinrude, Mercury, Mercruiser, and Tohatsu motors. We also offer one of South Jersey’s largest stock inventories of parts for your boat. We’ll ensure your boat is ready for the season, so you can fully enjoy your time on the water.
Which is better aluminum or stainless steel boat props?
  • Best choice at speeds over 50mph, or if your boat is running over oyster beds or sandbars regularly. Stainless costs more but is five times more durable than aluminum. Stainless props can be repaired, at a higher cost, to like-new condition, while repaired aluminum will suffer from metal fatigue and a loss of strength.
Why do boat owners want their boats repaired?
  • The owner wants the boat repaired to the way it was just before the damage occurred, or may even want the boat to be totalled if it seems like the boat will never be the same again. All of this pushes the cost of the repairs upward toward the fair market value of the boat.