Can you use magic eraser on vinyl boat seats?

10
German Gleichner asked a question: Can you use magic eraser on vinyl boat seats?
Asked By: German Gleichner
Date created: Tue, May 18, 2021 11:31 PM
Date updated: Tue, Jun 28, 2022 11:13 AM

Content

Video answer: Removing mold from vinyl boat seats.

Removing mold from vinyl boat seats.

Top best answers to the question «Can you use magic eraser on vinyl boat seats»

You can use Magic Eraser on vinyl floors, vinyl siding, and vinyl boats seats, and get amazing results as shown in the photo above. For example, in high traffic areas on your boat such as walkways and decks, you're going to get a lot of muddy footprints, dirt, grease, and more nasty stuff.

FAQ

Those who are looking for an answer to the question «Can you use magic eraser on vinyl boat seats?» often ask the following questions:

âš“ How do i remove mold from vinyl boat seats?

  • Spray CLR mold and mildew stain remover over the vinyl boat seats and leave for 5 minutes. Then take a soft brush, use scrub lightly to loosen up mold and dirt, and wipe away with a microfiber cloth. Repeat this step as many times as you can, then with any remaining stubborn mold, wipe gently with a Magic Eraser.

âš“ How do you fix vinyl boat upholstery?

  1. Clean the surface of the vinyl…
  2. Get rid of any adhesives and sealants…
  3. Inspect the vinyl…
  4. If your vinyl cracks while you're boating, you can use duct tape as an emergency “repair kit.” As useful as duct tape is, however, you'll want to avoid using it as a long-term solution.

âš“ How do you get black mold off vinyl boat seats?

  1. Step 1: Spray CLR Mold Remover onto the seats…
  2. Step 2: Use a soft brush and scrub lightly…
  3. Step 3: Wipe away mildew debris with a microfiber cloth…
  4. Step 4: Use the Magic Eraser for the really stubborn stains…
  5. Step 5: Use 303 Protectant to seal and protect the vinyl.

âš“ How do you keep vinyl boat seats from cracking?

The best way to maintain your seats is to wash them with a marine grade vinyl cleaner or a solution of mild dish soap such as Dawn or Ivory, warm water and a soft bristled brush. Then once the seat is thoroughly dry, apply a thin coat of a vinyl protectant to seal the material and build a layer of sun protection.

âš“ How do you make vinyl boat seats look new?

  1. Prep seat by removing mildew with general purpose mildew remover.
  2. Clean seat with SEM Soap using a gray scuff pad. Then, use Vinyl Prep…
  3. Use masking tape to protect areas from overspray…
  4. Apply Vinyl Coat.

âš“ How do you protect vinyl boat seats from sun damage?

  • Periodically cleaning and caring for your vinyl boat seats, however, will prolong their life, protecting them against the sun’s damaging ultraviolet ray. Here, we’re going to reveal some simple and effective ways to protect vinyl seats from sun damage. Keep your boat seats covered when they aren’t being used.

âš“ How much does it cost to replace vinyl boat seats?

The cost of reupholstering boat seats will depend on the material/fabric being used, the number of seats, where you live and company doing the job. Overall, the price per seat cushion is usually around $100 to $300+.

âš“ How to protect vinyl boat seats from sun damage?

  • If you don’t have access to a garage or shed to store your boat, perhaps you can use a mooring cover, or even toss some covers over the seats. Most boating supplies stores sell seat covers for about $40-$50 bucks. Cleaning your vinyl boat seats on a routine basis will reduce the risk of sun damage.

âš“ How to repair cracks in vinyl boat seats?

Just give your seats a once-over inspection after you’ve cleared out the debris and cleaned the vinyl itself. If your vinyl cracks while you’re boating, you can use duct tape as an emergency “repair kit.” As useful as duct tape is, however, you’ll want to avoid using it as a long-term solution.

Video answer: Magic eraser and how to clean leather seats.

Magic eraser and how to clean leather seats.

9 other answers

If soap won’t remove them, try Magic Eraser. Use On & Off Hull Cleaner on waterline stains, but use it only on the fiberglass hull. Wash your boat weekly with boat soap, and remove stains right away.. Can you use vinegar on vinyl boat seats?

Well, the short answer is yes, it does. Lots of boat owners have successfully used Magic Eraser to get rid of stubborn stains and even mold and mildew off of vinyl boat seats, making it a great choice for a deep clean. But that doesn’t mean you should pull out that block of Magic Eraser every time it’s time to clean your boat.

If you are regular visitor to Pontoonopedia, you will know how much I love the Mr Clean Magic Eraser for cleaning boat seats and vinyl upholstery on boats. It’s an excellent product, and takes off mildew, mold, stains, and loads more. Magic Eraser on vinyl quite simply works – but you need to be careful on how you use it.

But if you want to get rid of really deep seated stains, then Magic Eraser would be the solution. The stuff buffs out all sorts of contamination and works to get rid of dirt and stains even in the tightest crevices, nooks, and crannies of your vinyl upholstery.

I've heard of using Magic Eraser on a boat vinyl, but not on the gel coat. I'd be too paranoid to try. However, just this weekend someone told me a tip for waterstains/mildew. Take a small concetration of Lime Away product (about an inch in your spray bottle) then dilute it with plain old water.

You can use Magic Eraser on vinyl floors, vinyl siding, and vinyl boats seats, and get amazing results as shown in the photo above.For example, in high traffic areas on your boat such as walkways and decks, you're going to get a lot of muddy footprints, dirt, grease, and more nasty stuff.

You can also use marine vinyl cleaner that is made specifically to clean seats. This is recommended because you don’t want harsh cleaners and scrubbing to take off the outer protective layer of he vinyl. If you’re not careful you can easily take years off the life of your vinyl simply by cleaning it with the wrong solution.

Clean all the dirt and grime. Seats look beans new.

They have not completed testing of Magic Eraser on upholstery or fabrics. They do certify it for use on vinyl, such as windows, but not vinyl upholstery. The rep said that if I choose to use it, be careful, the key is to use it lightly, which is not a problem, because even using lightly, the vinyl brightens right up.

Your Answer

We've handpicked 6 related questions for you, similar to «Can you use magic eraser on vinyl boat seats?» so you can surely find the answer!

How to repair marine vinyl seats?

Fixing upholstery damage on a marine boat vinyl seats with We Can Fix That - YouTube.

What is the best cleaner for vinyl boat seats?

Soap and Water - Warm Dish Soap and Water is the best way to safely clean Marine Vinyl. It may take some elbow grease, but if you clean your material every few weeks this method is the safest. 3M Vinyl cleaner/protectant cream - This product is one of our favorites.

What is the best thing to clean vinyl boat seats?
  • Make a solution of 1 gallon of water and 1/4 cup of mild soap.
  • Use a soft cloth or sponge to wipe the vinyl in a circular motion, avoiding pooling water in the seams.
  • Rinse the seats with clean water and a clean cloth to remove excess soap.
What is the best vinyl repair kit for boat seats?
  • Best Overall: Coconix Vinyl and Leather Repair Kit.
  • Best Repair Adhesive: Vinyl Repair Solution by Leather FixIt.
  • Best Kit for Cracks: Leather and Vinyl Repair by LeatherLex.
  • Best Patch Kit Collection: Tear-Aid Vinyl Repair.
  • Best Restore Kit: FORTIVO Black Leather and Vinyl Repair.
What to do about rips in vinyl boat seats?
  • I placed duct tape over the rips so they didn't get any worse and would cover up the opening to the foam underneath. Problem is that in this hot Georgia heat, the duct tape is melting and getting sticky and sliding off the vinyl seats. Anyone know of anything else I can do for a quick fix to cover up the rips / tears in the vinyl seats.

Video answer: How to boat/marine: easy clean mold mildew from vinyl boat seats & interior

How to boat/marine: easy clean mold mildew from vinyl boat seats & interior What will take mildew off vinyl boat seats?
  1. Spray Mold Remover onto the Seats. With all your cleaning materials assembled, start with spraying your mold remover onto your seats…
  2. Start Scrubbing…
  3. Wipe Away Debris…
  4. Repeat as Necessary…
  5. Use Magic Erasers on Stubborn Stains…
  6. Use Vinyl Protectant.

Video answer: Remove scuff marks with mr. clean magic eraser!

Remove scuff marks with mr. clean magic eraser!