How wide should a boat lift be?

Herbert Osinski asked a question: How wide should a boat lift be?
Asked By: Herbert Osinski
Date created: Wed, Mar 10, 2021 1:07 PM
Date updated: Mon, Jul 4, 2022 9:15 PM


Top best answers to the question «How wide should a boat lift be»

We recommend adding 10-12 inches for additional clearance to load and unload your boat. For example: If your boat is 101” with 12” of clearance, you would need a 120” wide lift.

9 other answers

The beam is the widest portion of your boat, so your boat lift has to be able to accommodate that — plus a minimum of a four-inch cushion on either side. If you’re going to use guideposts on the lift, you’ll want at least a ten-inch cushion.

The legs in both lifts are 110" center-to-center wide, but the new lift is 11" longer (6XV is 130" long). Also, we ordered some custom extension brackets from basta that widen each canopy post by 4.5" for a total of 9" additional inches in width.

As the widest portion of your boat, the beam should be accommodated by the boat lift. Don’t forget to check the measurement of the cradle beam length as well. You don’t want your boat lift to be too small or too big. Be sure that either side has a minimum of a four-inch cushion.

After determining the required boat lift capacity, you’ll also need to work out the required cradle width. This involves measuring the beam of your watercraft, which is essentially the widest part of your boat. With this information, you should also consider the water depth where your boat lift will go to ensure it can be lowered safely.

The inside pile to inside pile width needed to park your watercraft on the lift should be the beam width of your watercraft plus at least a 4” cushion on both sides (this minimum distance situation presumes that you will have dock pile bumpers and use the piles as guides).

For a main channel dock or rougher water area, make sure your lift has arms that are at least 2.5”. The arms of the lift attach to the dock and pivot the lift up and down with the motion of the...

The Length. Length of the boat MUST be factored in order to best align the center of the boat’s gravity with the center of gravity of your boat lift. By doing this you are using leverage to maximize the lift’s capacity and minimizing the strain on the dock.

Since Basta’s boat lifts are offered in both aluminum (from 2,000- to 6,000-pound capacity) and galvanized steel (7,000- to 50,000-pound capacity), Sam Basta advises “installing the lightweight aluminum boat lifts for vessels that are removed and stored seasonally, while galvanized steel boat lifts are installed for heavier Class A boats or in locations with heavy wind and wave action or steep slopes.”

As a result, it is important to ensure that preventative measures are taken against boat lift exposure damage. When the boat lift is out of use, you should make sure that it is not submerged or even touching the water’s surface. To do this, turn on the boat lift motor and use the switch to lift the unit above the water’s surface.

Your Answer