Video answer: What to do if your boat lift leaks down
Top best answers to the question «Why won't my boat lift go down»
One of the reasons behind the boat lift not going down is a winch cable, that could be rusted and stuck due to inactivity… If your boat is having trouble going down and at the same time is making a loud noise, then it is either not greased properly or incorrectly installed. The release brake could be stuck as well.
Video answer: What to do if your lift will not raise
10 other answers
As we are coming into the boating season, some problems with your boat lift could arise. One of the reasons behind the boat lift not going down is a winch cable, that could be rusted and stuck due to inactivity. To fix this condition, you may need to use some WD40. The motor can be stuck due to winter inactivity as well.
My folks have a Shorestation lift and here’s a couple common items. Cable is spooled on to itself. Cure – good leather gloves are a requirement. Get some slack in the cable and get it unseated by hand. Just kind of stuck due to rust or inactivity. Cure – One person stand on the side that won’t go down.
Some boat lifts have problems where the platform drifts down. This can happen for a few different reasons in hydraulic boat lifts. Usually, the first thing to try is to cycle your boat lift up and down to remove any air in the system. You will also want to check the oil in the reservoir.
My boat lift will not go down. How do I get my boat lift to lower? Verify that there are no obstructions keeping the boat lift from submerging. Also, check to make sure the hose is not kinked and trapping the air in the hose. Lastly, if this is the first time you are using it after a long period of time, the unit may be air-locked.
What to do if your boat lift leaks down - YouTube. If your boat lift leaks down, the first step is to determine whether your lift actually has a leak, or if it is another issue. To determine this ...
Your boat lift motor will start but not lift the load- This could indicate that there is an issue with low voltage or you need a different size wire; Your boat lift motor hums- This could be the several things; Your boat lift motor will only turn on manually- This could be something wrong with your wiring or the switch. Brands We Carry: AO Smith, and Leeson
Unit rises slowly. Low voltage to pump. Have wiring checked for proper size from power source. Unit is overloaded. Remove load. Check travel speed without load. Weigh load to see if load is within limits of the lift capacity. Load on lift is within lift rated load. Pressure relief valve may be set to low.
Also check to make sure no bad cables in lift or that the lift isn’t raising the boat at an angle. You can also take the boat off the lift and try raising the motor to see if the light goes off. 6. On the AC Auto Stop. If there are any issues try resetting the remotes and the Auto Stop points. Click here for steps to follow.
If you discover you have no power trying to work your boat lift at the box or with your handheld device pressing the up or down buttons, we're going to review the steps you need to take to find the problem. I. Status Check List... Check and verify the status of the power to your dock. Check to make sure the breaker is on.
Tilt and trim not working. Trim goes down but not up. Tilt and trim issues. Trim sender is usually the problem if it goes down and not up. Mercruiser alpha o...